1006 PolyUrea Spray

1006 PolyUrea Spray is a two-component, high wet-out, open-time aromatic MDI or TDI prepolymer combined with a multifunctional polyurea amine blend. It is a “pure polyurea” system with no urethane or other additives.

Unique Properties

Slow Gel & Set Time: Enhanced bond strengths due to slower set time and better “wet-out.”
Durability: Extremely tough structure with 100% solids and 6-8 minute set time.
Chemical Resistance: Offers excellent adhesive properties and chemical resistance.
USDA Compliant: Conforms to USDA requirements for incidental food contact.
Performance: Hard, non-brittle, flexible, and impact/abrasion-resistant.
Marine Suitability: Highly hydrolytic stable and ideal for marine environments.

Advantages

Extended set time (6-8 minutes) for better bonding.
Excellent compatibility with reinforcing fabrics and primers.
Suitable for various surfaces like concrete, wood, and metal.
Non-volatile, odor-free with 100% solids.
High resistance to chemicals, abrasion, and impacts.
Perfect for industrial surfaces, roofing systems, and secondary containment.

Use Areas

Marine environments
Secondary containment (with non-skid features)
Protective coatings for processing equipment
Industrial service surfaces
Roofing systems
Water features and geotextile containment treatments

Preparation

Concrete surfaces: Ensure a 28-day cure and clean thoroughly. Maintain a pH of 8.0-11.0 and provide a rough profile of at least 2 mils.
Steel surfaces: Perform sandblasting to near-white finish with a 2-mil profile.

Application

Use Gusmer or Graco heated high-pressure equipment.
Minimum heat: 160°F. Surface temperature: -20°F to 120°F.
Apply at the specified thickness and within 2-3 minutes for aggregate broadcasting.